NN11-Pneumatic Foot Switch for Tabletop Corner Nailing Machine

Pneumatic Foot Switch for Tabletop Corner Nailing Machine – Hands-Free Framing Control

The Pneumatic Foot Switch for Tabletop Corner Nailing Machine transforms your corner nailer into a two-handed operation tool, using both hands to position and hold the frame moulding for straighter, tighter corner joints and reduced repetitive strain risk.

Dimensions and Connector

The Pneumatic Foot Switch for Tabletop Corner Nailing Machine measures 245mm length x 130mm width x 135mm height. Supplied with a 2-minute 4cm (2?4?) straight-head pneumatic connector that threads directly into the air inlet port of standard tabletop corner nailing machines.

Safety Features

The bright yellow powder-coated protective guard prevents accidental pedal depression when the operator is repositioning stock or clearing jams. The guard must be deliberately lifted to access the pedal, providing an intuitive safety interlock.

Ergonomics

Low actuation force and a wide, ribbed pedal surface reduce operator fatigue in high-volume production environments. The foot switch can be positioned anywhere on the floor within hose reach.

Installation

Connect the 2-? fitting to the machine’s control air inlet. Ensure air supply pressure matches your machine’s rated operating range (typically 0.4-0.8 MPa). Test with a single dry cycle before resuming production.

Pair with our Oil-Water Separator and see our CNC Foot Switch for digital corner nailers.