NN08-Standard Nailing Die Number 10 for Corner Nailer

Standard Nailing Die Number 10 for Corner Nailer – Dual-Lock Production Die

The Standard Nailing Die Number 10 for Corner Nailer is engineered for production-grade corner nailing machines that require secure die retention across thousands of daily nailing cycles. Its dual locking port design prevents die creep and ensures consistent nail placement even at high production speeds.

Technical Specifications

Body: 25mm width x 25mm depth x 15mm height. V-groove opening: 9mm. Nail slot depth: approximately 3mm. The square body cross-section makes this die easy to orient correctly during installation.

Dual Locking System

Unlike single-lock dies, the Standard Nailing Die Number 10 for Corner Nailer features two locking port positions, particularly valuable in high-volume shops where vibration from continuous machine operation can gradually shift improperly secured dies.

Hardened Steel Construction

Heat-treated tool steel ensures the groove maintains its 9mm width and 3mm depth throughout the die’s service life. The tight tolerances prevent V-nail rocking during the drive stroke, a common cause of split corners in cheaper die designs.

Compatibility

Fits production corner nailers with a 25x25mm die seat. Not interchangeable with die numbers #7 or #15.

Browse Die #7 and Die #15.