Fundada em 2004Engenharia com certificação CEResposta por WhatsApp em até 1 horaFoco em ritmo de produção

FP100 Back Panel Support Blanking Saw

Soluções para fábrica · Automação de corte e junção em escala de produção

FP100 automatic back panel support saw — modular blanking for easel frame back supports

Modular back-panel cutting—optional factory expansion.

≤1220 mmMax Panel Length
≤300 mmMax Panel Width
≥30 mmMin End Width
Receba um orçamento personalizado em até 2 horasWhatsApp
Visão geral

The FP100 is the blanking station for easel back support profiles on desktop picture frames. It delivers high-speed automated batch cutting when back-panel workflow is in scope—typically added as a modular expansion after NC/NN cut-and-join backbone, not as a first-shop purchase. Panels up to 1220×300 mm are processed in centralized batch blanking before handoff to the FP200 dovetail machine.

Por que escolher este modelo
  • Automated blanking replaces manual table-saw cutting for daily back-support production at scale.
  • Modular factory expansion—add when easel-back SKU volume justifies dedicated back-panel stations.
  • Sized for inline throughput matched to FP200 dovetail finishing on the same back-panel zone.
Aplicações
  • Mid-to-large frame factories
  • Easel-back desktop frame lines
  • In-house back support blanking
  • High-volume retail frame SKUs
  • Modular expansion after cut-and-join automation
Como funciona

Arquitetura: Automated back-panel support blanking saw

  1. Panel stock is loaded for batch blanking to support dimensions.
  2. The saw cuts support profiles to length and width within machine limits.
  3. Blanks accumulate for transfer to the FP200 dovetail station.
  4. Finished supports proceed to assembly or packaging downstream.
Especificações técnicas
Power7.79 kW
Voltage380V
Air Pressure6–8 kg/cm²
Max Panel Length≤1220 mm
Max Panel Width≤300 mm
Min End Width≥30 mm
Comparar modelos
DimensãoFP100Back Panel Support Dovetail Machine
AplicaçãoMid-to-large frame factories cutting easel back support blanks in-houseFactories paired with FP100 requiring automated dovetail slot cutting on support ends
ProdutividadeVery high (inline blank cutting)Very high (matched to blanking speed)
Nível de automaçãoAutomated blankingAutomated slot cutting
Volume diário recomendado5,000+ supports/day5,000+ supports/day
Recursos
Perguntas frequentes

What role does the FP100 play on the line?

It is the blanking station for easel back supports—add when back-panel workflow is in scope, as a modular expansion after cut-and-join backbone.

Are there length and width limits?

Panels up to 1220 mm long and 300 mm wide for centralized batch blanking.

Does it require other equipment?

Yes—after blanking, the FP200 dovetail machine is required to finish the support to final spec.

Is FP100 required for a new framing shop?

No. Starter shops cut foam or buy pre-cut backs by hand. FP100 pays off when daily back volume or easel-back SKUs justify dedicated stations.

What upstream equipment typically precedes FP100?

FP100 is added after NC/NN cut-and-join automation is in place—NC600 or NC500 stack cutting with NN300 or NN500 joining is the typical backbone before back-panel expansion.

Produtos relacionados
Soluções para fábrica · Mais equipamentos
Auto Double Miter Saw NC500
Framing Machine

Flexible Stack Cutting System

A NC500 é uma serra esquadria dupla automática pneumática projetada para corte de precisão em molduras. Possui ajuste inteligente de velocidade para corte de madeira, MDF e PVC.

Voltage: 220V trifásico (outras tensões disponíveis sob consulta)
Ver detalhes →Solicitar orçamento

Ver linha completa de Soluções para fábrica →

Need high-volume desktop easel back supports? Explore back-panel blanking solutions Soluções para fábrica →

CEMáquinas certificadas
2004Fabricação desde
50+Mercados de exportação atendidos

Não sabe por onde começar?

Guia para começar em molduraria →Ver soluções para oficinas →

Próximos passos

Insights semanais sobre equipamentos de molduraria

Prefere conversar? Vendas por WhatsApp